|
|
||
|
|
User Instructions
Congratulations on your purchase of a Spa Electrics underwater lighting system. Spa Electrics, specialists in underwater lighting, have been designing and manufacturing underwater lighting systems since 1976, with a focus on quality and reliability. All Spa Electrics lights are manufactured in Australia from only high quality materials. In order to maintain a long product life and hassle free operation, please take the time to become familiar with the following information. Installation a Cable length should not be shortened on the Halogen light, if in doubt contact Spa Electrics. a Ensure that the lighting system is installed by suitably qualified persons only (eg registered pool builder and/or qualified electrician), in accordance with AS/NZ 3000:2000. a For safe and proper installation, ensure that only those parts supplied are used. Maintenance a Spa Electrics lighting systems are specifically designed for use in underwater applications and as such do not require any on going maintenance. They should however be used on a regular basis throughout the year and not subjected to any physical abuse or misuse. Cleaning a Should your underwater light need to be cleaned at any stage, be sure to use only a mild detergent. Products such as methylated spirits can weaken certain parts of the fitting, especially coloured lenses. Use a Underwater light must be water cooled at all times. Do not switch on light until installation is complete and light has been fully submerged in water. a To ensure maximum life, your underwater light should be used regularly throughout the year. a Do not operate your halogen underwater light for a continuous period extending beyond eight hours per day. This product has been designed for domestic use, not for commercial or security purposes. a The C.L.E has been designed for commercial use and can be operated for continuous periods of time. WARNING
BEFORE TOUCHING ANY ELECTRICAL INSTALLATION OR CHECKING GLOBES AND FUSES, SWITCH OFF MAINS POWER. ANY MODIFICATION TO AN ELECTRICAL CIRCUIT MUST BE CARRIED OUT BYA QUALIFIED ELECTRICIAN. NEVER TURN HALOGEN LIGHT ON OUT OF WATER, DAMAGE TO YOUR LIGHT WILL OCCUR. WN250 C.L.E niche light: The WN250 C.L.E does not contain any user serviceable parts, opening light will void your warranty. If you do encounter a problem with a C.L.E light, please contact Spa Electrics. For further information on this product, or for any other inquiries, please contact: Spa Electrics Pty Ltd |
